ARM Technical Support Knowledge Articles

CYGNAL DLL DEVICE SELECTION PROBLEMS

Applies to: uVision Debugger

Answer


Information in this article applies to:


QUESTION

I am working on a Cygnal C8051F021-based board. The Cygnal DLL and Keil uVision have been working fine on my old computer.

I recently switched computers and now I cannot connect to the board anymore. The error message I received is as follows:

The C8051F021 device selection does not match the hardware device C8051F021.

ANSWER

This problem occurs when the device name in the Device Database doesn't match the information in the Cygnal DLL. This can happen if you replace the Cygnal-provided device database (UV2.CDB) with the standard from Keil.

RESOLUTION

Copy the device database file supplied by Cygnal into the KEILUV2 folder.

STATUS

Cygnal has changed the way devices are selected from their DLL and this problem no longer exists. You may download the latest Cygnal DLL from their web site.

SEE ALSO

Article last edited on: 2004-04-24 11:30:05

Rate this article

[Bad]
|
|
[Good]
Disagree? Move your mouse over the bar and click

Did you find this article helpful? Yes No

How can we improve this article?

Link to this article
Copyright © 2011 ARM Limited. All rights reserved. External (Open), Non-Confidential