ARM Technical Support Knowledge Articles

KEIL-SPECIFIC DEVICE DRIVERS

Applies to: General Topics

Answer


Information in this article applies to:


QUESTION

I have installed the Keil development tools and would like to know what Keil-specific drivers are installed on my PC.

ANSWER

The Keil development tools install the following drivers:

  1. Security Key (Dongle) Device Driver
    This driver is required for access to the Security Key and is listed under My Computer - Properties - Device Manager. The driver is listed when you use View - Show hidden devices under Non-Plug and Play Drivers - Sentinel.
  2. C166 OCDS LPT (Wiggler) Device Driver
    This driver is installed for access to the Infineon C166/XC166 OCDS interface via the LPT port. It is listed under My Computer - Properties - Device Manager. The driver is listed when you use View - Show hidden devices under Non-Plug and Play Drivers - Keil_LPT.
  3. Keil EPM900 (LPC Emulator/Programmer) USB Device Driver
    This driver is installed for the Keil EPM900 Philips LPC Emulator/Programmer. It is listed under My Computer - Properties - Device Manager. The driver is listed under Universal Serial Bus controllers - Keil USB LPC900 EPM.
  4. Keil ULINK (USB-JTAG Adapter) USB Device Driver
    This driver is installed for the Keil ULINK USB-JTAG Adapter. It is listed under My Computer - Properties - Device Manager. The driver is listed under Universal Serial Bus controllers - Keil ULINK.

SEE ALSO

Article last edited on: 2006-11-22 04:53:35

Rate this article

[Bad]
|
|
[Good]
Disagree? Move your mouse over the bar and click

Did you find this article helpful? Yes No

How can we improve this article?

Link to this article
Copyright © 2011 ARM Limited. All rights reserved. External (Open), Non-Confidential