|ARM Technical Support Knowledge Articles|
Applies to: MCB2100 Evaluation Board
Information in this article applies to:
The CAN I/O port on the MCB2100 Board does not work as it should.
According to the schematics, the pins CANL and CANH are wired to pin 2 and 7 of the DB-9 connector. However, they are actually connected to pin 4 and pin 8.
Pin 4 and pin 8 are not used on the CAN connector. So the workaround is to connect pin 2 to pin 4 and pin 7 to pin 8 underneath the DB9 connectors.
Most of the MCB2100 Version 2 boards are already shipped with a correction for that error. So check your Board first to see if it already has this fix.
Article last edited on: 2006-10-23 17:19:24
Did you find this article helpful? Yes No
How can we improve this article?