ARM Technical Support Knowledge Articles

NO ALGORITHM FOUND FOR ADDRESS

Applies to: ULINK USB-JTAG Debugger

Answer


Information in this article applies to:


QUESTION

I am trying to download my project into Flash via ULINK. ULINK seems to connect to the device, but a Message Box pops up and tells me:

No Algorithm found for Address 0x0000000

ANSWER

This error usually indicates that an appropriate algorithm was not chosen for the flash device. To add one in the Target configuration:

  1. Open Options for Target - Utilities.
  2. Choose the ULINK ARM Debugger and press Settings.
  3. Press Add and choose the algorithm that fits your device. In case that the Address Range for the device is wrong select the algortihm and correct the Start and Size information.
  4. Define the address spaces RAM for Algorithm and the Flash ROM area valid for the algorithm with Start and Size.

Note: you cannot use the command Flash - Download for RAM areas in your application. The RAM content will be downloaded when you start the debugger.

MORE INFORMATION

SEE ALSO

Article last edited on: 2007-03-07 08:17:54

Rate this article

[Bad]
|
|
[Good]
Disagree? Move your mouse over the bar and click

Did you find this article helpful? Yes No

How can we improve this article?

Link to this article
Copyright © 2011 ARM Limited. All rights reserved. External (Open), Non-Confidential