ARM Technical Support Knowledge Articles

10-PIN / 20-PIN 1.27MM ARM CORTEX DEBUG CONNECTOR

Applies to: ULINK USB-JTAG Debugger

Answer


Information in this article applies to:


QUESTION

Which connector can be used as counterpart for the 10-pin 1.27mm pitch ARM Cortex-Debug and the 20-pin 1.27mm ARM Cortex-Debug+ETM connector on ULINK2/ULINK-ME/ULINKpro for our hardware design?

ANSWER

ULINK family of debug and trace adapters can connect to the Samtec .050" Micro Header FTSH Series which is available in different options (plating, tail, shroud, and lead style). Use the included ordering information for the connector that fits the needs of your design.

On our MCB boards we are using these versions of SMT micro connectors:

We manually remove pin 7 of both connectors to comply with the standard.

MORE INFORMATION

ATTACHED FILES

Request the files attached to this knowledgebase article.

Article last edited on: 2012-08-20 08:11:27

Rate this article

[Bad]
|
|
[Good]
Disagree? Move your mouse over the bar and click

Did you find this article helpful? Yes No

How can we improve this article?

Link to this article
Copyright © 2011 ARM Limited. All rights reserved. External (Open), Non-Confidential