ARM Technical Support Knowledge Articles

Error: Cannot Write to RAM for Flash Algorithms

Applies to: ULINK USB-JTAG Debugger

Answer


Information in this knowledgebase article applies to:


SYMPTOM

Flash download does not work with Texas Instruments (formerly Luminary Micro) LM3Sxxx devices in MDK-ARM version 4.22(a) when reset-type "Autodetect" is selected in the ULINK2 or ULINKpro driver setup dialog. The following error dialog is displayed:

Cannot Write to RAM for Flash Algorithms !

RESOLUTION

Please download the attached ZIP file and extract it into the C:\Keil\ARM\BIN folder. If MDK-ARM is installed in a different folder, please adapt the path accordingly.

STATUS

This issue will be solved in MDK-ARM versions greater than 4.22. The attached files only work for MDK-ARM version 4.22!

ATTACHED FILES

Request the files attached to this knowledgebase article.

Article last edited on: 2012-09-11 06:31:13

Rate this article

[Bad]
|
|
[Good]
Disagree? Move your mouse over the bar and click

Did you find this article helpful? Yes No

How can we improve this article?

Link to this article
Copyright © 2011 ARM Limited. All rights reserved. External (Open), Non-Confidential