ARM Technical Support Knowledge Articles

RealView ICE Update reports a time-out or fails to program a DSTREAM / RealView ICE correctly

Applies to: DSTREAM, RealView ICE and Trace (RVI / RVT)

Answer

Sometimes when running "Debug Hardware Update" (formerly known as "RealView ICE Update"), a time-out error is displayed during the reboot phase of the update process.

In most cases this is due to network problems, for example a damaged network cable or a very slow network. This can be overcome by connecting the DSTREAM/RVI unit directly to the PC via a USB connection, or, alternatively, via an Ethernet cross-over cable.

For more information on connecting via an Ethernet cross-over cable, see http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.faqs/ka3908.html 

Article last edited on: 2011-11-02 16:35:32

Rate this article

[Bad]
|
|
[Good]
Disagree? Move your mouse over the bar and click

Did you find this article helpful? Yes No

How can we improve this article?

Link to this article
Copyright © 2011 ARM Limited. All rights reserved. External (Open), Non-Confidential