|ARM Technical Support Knowledge Articles|
Applies to: CT1176
[new 14 March 2007]
The test chips fitted to the CT1176JZF-S have been produced with an incorrect IDCODE for the test chip boundary scan JTAG TAP controller. The IDCODE of the processor TAP controller has been set correctly, therefore ICE auto detection during a debug session will work as expected.
This IDCODE error will only be noticed when the Core Tile is connected to a system that is in configuration mode, as this is when the ARM's TAP controller is replaced with the boundary scan TAP controller. Progcards for RVI and USB will auto detect the part as ARM1136J-Sr0_BS2. As a result of this error, the progcards .brd files have had to be written to match with this incorrect part, functionality of programming FPGA images is not affected.
If you are using progcards_multiice, then you will need to manually configure the server to show ARM1136J-Sr0_BS2 in order for the .brd files to match & perform programming.
The IDCODE for the processor TAP is 0x07B76F0F (correct)
The IDCODE for the boundary scan TAP is 0x0F21DF0F (incorrect)
In addition, the test chips fitted to the CT1176JZF-S boards have a minor error in the silk screen printing. The 'F' has been incorrectly printed as a 'P'.
Article last edited on: 2009-01-20 18:30:36
Did you find this article helpful? Yes No
How can we improve this article?