ARM Technical Support Knowledge Articles

IMPORTING A UVISION V1 PROJECT INTO UVISION V2.02

Applies to: uVision IDE

Answer


Information in this article applies to:


QUESTION

I need to import my old uVision Version 1 (V1) project files into uVision Version 2. How do I do this?

ANSWER

You must have uVision Version 2.02 or later to import a uVision V1 project file. In uVision Version 2.02 or 2.03, follow these steps to import a uVision V1 project file:

  1. Create a New Project.
  2. Select the Device for the new Project.
  3. Use Import uVision V1 Project... on the Project menu to select and import an old project file.

Once you have imported a project file from a previous software release, you should check the target (assembler, compiler, and linker) options to make sure they are correct.

SEE ALSO

If you have uVision V2.04 or later, refer to:

Article last edited on: 2005-07-09 11:48:34

Rate this article

[Bad]
|
|
[Good]
Disagree? Move your mouse over the bar and click

Did you find this article helpful? Yes No

How can we improve this article?

Link to this article
Copyright © 2011 ARM Limited. All rights reserved. External (Open), Non-Confidential