MON51 Target Monitor Knowledge Articles

Knowledge Articles in this section

• BAUD RATES
• CONFIGURING FOR DALLAS DS5000
• CONFIGURING FOR TARGET
• CONFLICT BETWEEN DATA AND CODE MEMORY
• CONNECTION TO TARGET SYSTEM LOST
• CYPRESS EZ-USB MONITOR PROGRAMS
• DATA/IDATA USAGE
• DEBUGGING WITH START ADDRESS OTHER THAN 0
• DISABLE CACHE TO AVOID MEMORY READS
• DOESN'T SAVE THE DUAL DATA POINTERS
• ERROR 22 (NO CODE AT ADDRESS 0045H) USING EZ-USB
• ERROR 22 (NO CODE MEMORY AT ADDRESS ????H)
• ERROR 26 (CANNOT WRITE INTERRUPT VECTOR)
• INTERRUPT FOR TIMER2 LOSES SERIAL INTERRUPT
• MONITOR DATA AREA
• MONITOR FOR THE PHYTEC PHYCORE 591
• MONITOR OVERHEAD
• MON_BANK CONFIGURATION FILE IS MISSING
• PHILIPS 89C51
• PROBLEMS WITH CODE BANKING SUPPORT
• PROBLEMS WITH DUAL DATA POINTERS AND SERIAL BREAK
• SHARING SERIAL PORT WITH USER APPLICATION
• STACK REQUIREMENTS
• STARTING PROGRAMS AT ADDRESSES OTHER THAN 0000H
• STRANGE BEHAVIOR OF PROGRAM CODE
• TESTING VON NEUMANN MEMORY AREAS
• USING LARGE XDATA AND CODE BLOCKS
• USING OFF-CHIP UART INTERFACES
• USING THE UV2 MON51 WITH THE CYPRESS CY3671
• USING WITH DEVICES WITH EXTERNAL PROGRAM LOCK BITS