4.3.2. Multiplexed trace port (ETMv1.x and ETMv2.x only)

You can implement a narrow (multiplexed) trace port where it is important to reduce the number of output pins to a minimum. You can achieve this by clocking the trace port at twice the processor operating frequency and routing pairs of trace port outputs to a single output pin. Use the PORTMODE signals to select multiplexed trace port operation, see Main Control Register, ETMCR. For implementation details, see the appropriate ETM Technical Reference Manual.

Copyright © 1999-2002, 2004-2009, 2011 ARM Limited. All rights reserved.ARM IHI 0014Q
Non-ConfidentialID101211