5.7.2. Load/Store Multiple instructions

For LSM instructions, ViewData is sampled for the first access of the sequence only. This ensures that either none or all of the words transferred are traced. This is necessary for successful decompression, and because the transferred data must be associated with the correct ARM core registers. LSM instructions are listed in Definitions.

Note

Non-Wait PIPESTAT values (that is, those that indicate an instruction was executed) are always given on the last cycle the instruction is executing. This is important for LSM instructions that execute and return data for several cycles.

Copyright © 1999-2002, 2004-2009, 2011 ARM Limited. All rights reserved.ARM IHI 0014Q
Non-ConfidentialID101211