ULINK®2 User's Guide
The Keil ULINK2 USB-JTAG Interface Adapter is a small hardware
adapter that connects the USB port of your PC to the JTAG or OCDS
debugging port of your target hardware. ULINK2 is kin to the original
ULINK USB-JTAG Adapter but has been updated and enhanced in many
ways. You may use ULINK2 to:
- Download programs and test them on your target hardware.
Program the on-chip FLASH memory of many devices.
- Program external FLASH memory of many target systems.
The ULINK2 User's Guide describes the ULINK2 Adapter and contains detailed
operating instructions for the hardware.
Introduction gives an overview of
the ULINK2 USB-JTAG Adapter, features, where to find Technical
Support, and a reference of supported devices.
Hardware Description explains the
components of the ULINK2 Adapter in detail.
Setup shows the ULINK2 Adapter
components, how to connect and use the board, and describes the
drivers and target cables.
Real-Time Agent allows you to view
and modify your target board's memory contents "on the fly",
without stopping your program. Step-by-step instructions show you
easy it is to how to add this feature to your application.
- November 2006: Initial revision.