ULINK®-ME User's Guide |
 |
The Keil ULINK-ME USB-JTAG Interface Adapter is a small hardware
adapter that connects the USB port of your PC to the JTAG or OCDS
debugging port of your target hardware. ULINK-ME is kin to the
original ULINK USB-JTAG Adapter but has been updated and enhanced in
many ways. You may use ULINK-ME to:
- Download programs and test them on your target hardware.
- Program the on-chip FLASH memory of many devices.
- Program external FLASH memory of many target systems.
The ULINK-ME User's Guide describes the ULINK-ME Adapter
and contains detailed operating instructions for the hardware.
-
Introduction
gives an overview of the ULINK-ME USB-JTAG Adapter, features, where
to find Technical Support, and a reference of supported
devices.
-
Hardware Description
explains the components of the ULINK-ME Adapter in detail.
-
Setup shows the ULINK-ME
Adapter components, how to connect and use the board, and describes
the drivers and target cables.
-
Real-Time
Agent allows you to view and modify your target board's
memory contents "on the fly", without stopping your program.
Step-by-step instructions show you easy it is to how to add this
feature to your application.
Revision History
- September 2007: Initial revision.